衡阳附近有没有服务

contact number: 400-183-1933



News and information

Current location: High pressure cleaning machine > News and information >The difference between high pressure pump and booster pump

The difference between high pressure pump and booster pump

Author: admin Release time: January 25, 2018 11:01 Number of visits:

Disclaimer! All the works marked with the source of this website are the works with copyright or right to use. Please reprint and indicate the source. Non local network works are from the Internet, do not leak oil to compress the packing, high-pressure reprint, the purpose is to transmit more information.

Pump repair, installation and operation. And according to the different structure of the pump to develop a separate operation procedures. Basically, attention must be paid to regular lubrication, oil replacement, and oil replenishment High pressure cleaning machine High pressure pump packing tightness, oil leakage should be compressed packing. If it is impossible to eliminate oil leakage by compressing packing, the area of high-pressure pump and booster pump should be replaced with new packing. High pressure pump When the valve seat, valve ball and valve plate are worn, they should be replaced with new ones.

The lubrication part of the pump is driven by the lubrication gear of the pump. The lubricating oil is sucked out from the cooler in the basement behind the engine base by gear pump, and pressed into the bearing cover and the parallel guide rail on the frame along the pipe through the oil filter to lubricate the crosshead. The used lubricating oil flows into the oil tank on the base of the pump set, and from there flows into the lubricating oil cooler. The lubricating oil is cooled by water passing through the serpentine tube.

The high pressure packing box is supplied with lubricating oil by an oil injector installed on the base of the pump unit. The driving end of the chain wheel is used to operate the crank shaft.

Hot news

Related products