衡阳附近有没有服务

contact number: 400-183-1933



News and information

Current location: High pressure cleaning machine > News and information >The main working medium of high pressure cleaning machine is pure water

The main working medium of high pressure cleaning machine is pure water

Author: admin Release time: 15:34, June 26, 2019 Number of visits:

   High pressure cleaning machine Same as other high pressure cleaning machines. Its main working medium is pure water. The high-pressure water pump pressurizes the ordinary tap water to more than 1000 atmospheres, and then sprays through the small hole high-pressure nozzle. Highly concentrated jet stream.
 
Due to the high impact capacity of this high-pressure water jet, it is immediately released on the soil to be cleaned, and forces such as bismuth stripping, shear composite failure and jet impingement can be formed on the surface. Dirt can cause dirt and matrix. Pressure difference is generated to remove dirt from the surface of the equipment.
 
At present, most of the pressure cleaners are driven by diesel engines and moved by mobile mode to facilitate the operation of the pressure cleaners. Relatively speaking, the intelligent control technology of this unit is quite high. A series of data such as motor, high pressure pump, water tank, vacuum system, air source and front pump are displayed on the instrument box. At the same time, the touch screen can be used for dynamic control unit. Operation.
 
In practical application, pressure cleaner is very important, especially high-power cleaner, especially pump barrel. Because the cleaning machine is a kind of container, under the pressure, the stress dispersion is relatively uniform, all the stresses are kept in the elastic range, the elastic bearing capacity is improved, and the fatigue life is improved. The design principle of cleaning machine is adopted. Choose materials and processes that can provide self reinforcing pressure and self enhancement.
 
In order to ensure the high-power press cleaning machine, please read the operation manual of the pressure cleaning machine manufacturer carefully when operating the equipment. Each press cleaner model is different.
 
Only use pressure cleaner to clean and choose. If you use a cleaner to achieve the desired cleaning effect, use a hot water cleaner for cleaning. At the same time, it also needs to configure the blasting mode, which is not only reliable, but also has become the standard part;
 
When using high-pressure cleaner to cut high-pressure water jet, there is a great relationship between related technology and pressure. Therefore, in the specific operation, pay attention to master the relationship between pressure and water cutting technology. And the working pressure of the equipment.
 
 
In the process of high-pressure water jet cutting, high-pressure cleaning machine mainly depends on pressure and kinetic energy to achieve material cutting. After a lot of practice, even if the water pressure exceeds a certain value, even pure water will produce some chemical reactions. The product was detonated.
 
 
 
Sandy water cutting is caused by the grinding sand in the water, the impact of sand and the collision of objects, of course, a large amount of which is easy to cause instability of special chemicals. After a lot of practice tests, the final value is about 2376 bar.

Hot news

Related products