衡阳附近有没有服务

contact number: 400-183-1933



Product Center

Current location: High pressure cleaning machine > Product Center >High pressure cleaning machine

High pressure cleaning machine

Author: admin Release time: 2016-09-01 10:04 Number of visits:

 
High pressure cleaning machine Is through the power device to make the high-pressure plunger pump to produce high-pressure water to wash the surface of the object. It can peel off the dirt and wash away, so as to clean the surface of the object. Because it is the use of high-pressure water column to clean dirt, so high-pressure cleaning is recognized as one of the scientific, economic and environmental protection cleaning methods in the world.
 
Product principle
The impact force of water is greater than the adhesion between the dirt and the surface of the object, and the high-pressure water will peel off and wash away the dirt, which is a kind of cleaning equipment to clean the surface of the object. Because it is the use of high-pressure water column to clean up the dirt, unless it is very stubborn oil stains need to add a little detergent, otherwise the foam generated by strong water pressure is enough to take the general dirt away.
 
Troubleshooting
In the process of using the cleaning machine, it is inevitable to have faults. In case of problems, the causes should be carefully found according to different fault phenomena.
1) The spray gun does not spray water
a) The water inlet and water inlet filter are blocked. b) Nozzle clogging. c) The heating spiral pipe is blocked, and the scale shall be removed if necessary.
2) Unstable outlet pressure
a) The water supply is insufficient. b) The air suction pipeline is caused by pipeline rupture and the detergent nozzle is not inserted into the cleaner. c) Worn nozzle. d) High pressure water pump seal leakage.
3) The burner does not ignite
a) There is not enough white smoke. b) The fuel filter, fuel pump and fuel nozzle are dirty and blocked. d) The solenoid valve is damaged. e) The spark is too weak due to the change of ignition electrode position. f) The high pressure ignition coil is damaged. g) The pressure switch is damaged.
High temperature and high pressure cleaning machine has the above problems, users can find out the causes by themselves and eliminate the fault. However, in case of serious faults such as pump leakage and crankcase oil leakage, the cleaning machine should be sent to the maintenance department with complete accessories and strong technical strength for repair, so as to avoid unnecessary economic losses.
 
Scope of application:
1. Chemical plant pipeline, reactor, container cleaning operations
2. Cleaning pipes, containers, heat exchangers, evaporation tanks, boilers, etc. in salt factories, pharmaceutical factories, sugar factories, etc
3. Cleaning of oil and gas pipelines and drill pipes
4. Remove glue, ship rust and paint
5. The cement plant rotary kiln quickly clear the blockage, remove the crust, etc
6. Ultra high pressure water jet, metal cutting

technical parameter
 

Hot news

Related products